Reflex

Reflex

gallery/b9
gallery/b10
gallery/b11
gallery/b12

RFB_Refix_DE_500

RFB_Servitec_95

RFB_Variomat_VS_2-2-75

Servitec

From its beginnings as a small workshop located in the company's headquarters in Ahlen in Westphalia, Reflex Winkelmann GmbH has today developed to become a global company. Since 2013, the company Sinus has been on board with a wide range of manifolds and low loss headers, which usefully complement the Reflex portfolio. With over 30 separate distribution companies across the world as well as factories in Germany, Poland, China and Turkey, Reflex Winkelmann GmbH is the main pillar of the Winkelmann Building+Industry business division under the umbrella of the Winkelmann Group. 1889 Heinrich Winkelmann and Caspar Pannhoff found a workshop to produce kitchen and household appliances made from enamelled metal such as kettles, coffee pots, soap basins, dustpans and milk cans
in Ahlen in Westphalia. 1955 During the industrial boom during the post-war period, the range changes from enamelled kitchen and household appliances to forming steel plates. Special parts for engineering, the automotive industry as well as heating and water technology, were produced.
1987
Founding of Reflex Winkelmann + Pannhoff GmbH + Co. KG
1994
Founding of Reflex-POLSKA Sp. z o.o., Wabrzezno, Poland
2000
Acquisition of Otto Heat Heizungs-, Energie- und Anlagentechnik GmbH + Co. KG
2010
Heinrich Winkelmann takes over as the fourth generation of manager of the Winkelmann Group at the
headquarters in Ahlen
2013
The 'Reflex' brand gets a brand relaunch with the new claim 'Thinking Solutions'.
The Reflex training centre is opened in Ahlen.
2014
Acquisition of the company Sinusverteiler GmbH
2015
Launch of the Winkelmann production system to optimise and increase efficiency in production processes
2016
Opening of a new Reflex distribution company in Dubai.
2017
The business division is rebranded to Winkelmann Building+Industry and enables the strategic opening of
future ranges.
Opening of a new Reflex distribution company in Singapore

Refix DC
WRAS approved diaphragm expansion vessel for use in mains water supply systems (in Germany only for systems which are not subject to the requirements of the DIN 1988, e.g. fire extinguishing and process water systems). Approval acc.
Reflix DD
Green/White, Flow-through, pressure vessel valve, 10 bar Flow through bladder pressure vessel for drinking water heating, water supply, and pressure booster systems. Built and tested according to DIN 4807 part 5, EN 13831 respectively
Refix DT
Green, expansion vessel, incl. Flowjet 1 1/4, 10 bar Refix DT with Flowjet 1 1/4" and integrated internal anti-legionella circulation, vessel for drinking water applications,water heating, water supply and pressure booster systems. Built and tested according to EN 13831
 

Pressurization Unit

Variomat
Reflex Variomat Control unit VS, for Pressurization, de-aeration and water make-up
Reflex Variomat VS control unit, the Reflex Variomat is a pump controlled pressurization unit with incorporated automatic water make-up and system de-aeration for heating and chilled water
systems.

The device is built according to EN 12828 and is provided with the EC mark. Unit particularly suitable for use in surroundings where a low sound level is required.

 

Variomat GIGA
Reflex Variomat Giga Hydraulic GH, Hydraulic module Pressurization, de-aeration and water make-up
Reflex Variomat Giga Hydraulic, module in compact design for Reflex Gigamat pump-controlled pressurization unit.

Suitable and equipped for the operation in heat generating systems acc. To EN 12828, EN 12952, 12953 as well as the requirements of the TRD 604 sh. 2.

Implementation of the functions pressure maintenance and automatic water make-up in heating and chilled water circuits.
 

Degassing Units

Servitec
Reflex Servitec Magcontrol, vacuum spray deaeration/make-up unit
Reflex Servitec, vacuum spray tube degassing unit with integrated automatic refill for closed
heating or chilled water circuits which are equipped with pressurization units as well as installations with static precharged expansion vessels.

Active and central degassing of the installation according to the principle of vacuum spray tube degassing.

Unit existing of a hydraulic part and a Reflex Control Basic operating unit. It is featuring an "auto-setup" function including a self optimizing operation. The de-aerator eliminates entirely the
free gases in the installation and withdraws up to 90% of the dissolved gases of the installation water.

The vacuum degassing of a partial flow of the installation water is processed according to an optimised time schedule with selectable degassing programmes. After a period of continuous degassing (adjustable and depending on the installation volume) at the start up, the control switches automatically to an economic mode (interval degassing).

 

Air & Dirt separation
Exvoid
Reflex Exvoid, Micro bubble separator Flanged connection,110°C,10bar
Air/microbubble separator for heating and cooling systems respectively for sealed system circuits.

Suitable for use with water and water/glycol mixture to a maximum of 50% concentration.

Removes circulating free air and gas bubbles with high efficiency from the system flow. Permanent evacuation by way of integrated Exvoid-T automatic air vent with high venting capacity. Facilitating
hydraulic balancing after filling operations with minimum pressure drop.
 

Exdirt
Reflex Exdirt D 300, Dirt separator Flanged connection, 110°C, 10 bar
Dirt and sludge separator for heating and cooling systems respectively for sealed system circuits.

Suitable for use with water and water/glycol mixture to a maximum of 50% concentration.

Fitting for the removal of dirt particles up to a size of 5,0 µm out of the liquid flow by way of a specifi-
cally designated insert.

The collection area can be easily emptied at regular intervals using a drain ball valve while the system remains in operation. The flanged collection chamber can be removed for inspection.
 

gallery/reflex_rgb_mit_claim